These items are not immediately available for pickup at our stores.
We can ship these products to our stores for free in-store pickup.
Items usually arrive at the store within 2 to 7 business days.
Share:
E-Mail To A Friend:Jetway MI97-30 Mini-ITX Motherboard Intel Celeron N2930 Quad Core, Built-in 12V DC, SIM Slot, PCI-E x1
E-mail this product information to:
Add your own personal message:
Enter your email address:
Note: Your email address is used only to let the recipient know who sent the email and in case of transmission error. Neither your address nor the recipient's address will be used for any other purpose.
1 +12V 2.5mm Diameter DC Power Jack 1 HDMI (1920 * 1200 @ 60Hz) 1 VGA (1920 * 1200 @ 60Hz) 1 Parallel 3 USB 2.0 1 PS2 Mouse/Keyboard Combo 2 Serial Ports (1 * RS232, 1 * RS232/422/485) 1 RJ45 LAN (10/100/1000) 1 USB 3.0 2 3.5mm Audio Jack (Line Out & MIC In)
Onboard I/O Connectors
1 PCI-E x1 Slot 1 SATA2 3Gb/s Connector 1 M.2 M-Key, 2242/2280, SATA 1 M.2 E-key, 2230, for WiFi (USB 2.0/PCIE x1) 1 M.2 B-Key, 3042, with SIM Slot (USB 2.0) 3 Serial Headers (RS232) 2 USB Pin Headers for up to 4 additional USB 2.0 Ports 1 40-pin eDP (2560 * 1600 @ 60Hz) OR 24-bits Dual Channel LVDS/Inverter (1920 * 1200 @ 60Hz) 1 8 bit GPIO Header 1 AT/ATX Mode Jumper 1 9-pin Front Audio Header 1 5-pin SMBUS Header 1 4-pin Fan Header 1 4-pin SATA Power Output (Male) 1 2-pin +12V Alternate DC-in (Mating plug: Molex 5557-02R)
Power Supply for MI97
External Power Supply – the board can be powered with a +12V external power supply though a DC connector on the back panel. The rear +12V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +12V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +12V 2-pin power connector, where pin 1 is +12V and pin 2 is GND. The internal 2-pin power connector is a Molex 5566-2 header which accepts a Molex 5557-02R connector from the power supply.
Caution: There is no isolation circuitry between the external +12V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +12V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Industrial PC √ Factory Automation √ Retail (POS/Kiosk/ATM) √ Panel PC √ IoT
Environment
Operating Temperature : 0 ~ 60°C Storage Temperature : -40 ~ 70°C Humidity: 10% ~ 90% RH @40°C (non-condensing)
1. Prepare a MS-DOS bootable flash drive. 2. Download the zip file. 3. Unzip the file and copy to the flash drive. 4. Reboot the PC with the bootable flash drive into MS-DOS mode and run *.bat in command prompt. 5. Wait until the update finished and power off the system.
Revised History
[A01]. Initial BIOS.
· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. · Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.
Validate your login
Sign In
Create New Account