Jetway JNF894G32-3455 with 32GB eMMC on board Intel Celeron J3455 Quad Core, 2 INTEL I211-AT GbE LAN,
Model #: JNF894G32-3455Item #: XJNF894G32-3455
x
Special Order
These items are not immediately available for pickup at our stores.
We can ship these products to our stores for free in-store pickup.
Items usually arrive at the store within 2 to 7 business days.
Share:
E-Mail To A Friend:Jetway JNF894G32-3455 with 32GB eMMC on board Intel Celeron J3455 Quad Core, 2 INTEL I211-AT GbE LAN,
E-mail this product information to:
Add your own personal message:
Enter your email address:
Note: Your email address is used only to let the recipient know who sent the email and in case of transmission error. Neither your address nor the recipient's address will be used for any other purpose.
Your message has been successfully sent.
Please fill-up the form properly.
Jetway JNF894G32-3455 with 32GB eMMC on board Intel Celeron J3455 Quad Core, 2 INTEL I211-AT GbE LAN,
2 x 204-pin DDR3L-1866 SO-DIMM up to 8GB (1.35V required)
Graphics
Intel HD Graphics 500, 250MHz - 750MHz (J3455)
Audio
Realtek ALC662VD HD Audio Codec with 3W Amplifier
LAN
2 x Intel I211-AT PCI-E Gigabit LAN
Storage
1 x SATA3 6Gb/s Connector 1 x M.2 SATA M-key 2242/2280 length Optional: 32GB eMMC
Super IO
FINTEK F81966D
TPM
OEM Option: Onboard TPM v2.0
Back Panel Connectors
1 +9-36V 2.5mm Diameter DC Power Jack 2 HDMI 1.4b (3840 * 2160 @ 30Hz) 2 RJ45 LAN (10/100/1000) 4 USB 3.0 1 3.5mm Audio Jack (Line-out)
Onboard I/O Connectors
1 PCI-E x 1 1 SATA3 6Gb/s Connector 1 M.2 SATA 2242/2280 M Key 1 Mini PCI Express Slot (Full-size) 6 Serial Headers (5 * RS232, 1 * RS232/422/485) 2.00mm pitch 2 USB Pin Headers for 3 additional USB 2.0 Ports 2.00mm pitch 1 40-pin eDP (3840 * 2160 @ 60Hz) 1 30-pin LVDS (1920 * 1080 @ 60Hz) 1 8-pin Inverter 5V/12V 1 SIM Card Slot 1 6-pin SIM Expansion Header 1 8 bit GPIO Header 1 6-pin PS/2 Header 1 9-pin Front Audio Header 1 5-pin SMBUS Header 1 4-pin Fan Header 1 AT/ATX Mode Jumper 1 Chassis Intrusion Jumper 1 4-pin Floppy Power Output (Male) 1 2-pin +9-36V Alternate Power-out (Mating plug: JST VHR-2N or TE 1-1123722-2)
Power Supply for NF894
External Power Supply – the board can be powered with a +9-36V external power supply though a DC connector on the back panel. The rear +9-36V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9-36V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9-36V 2-pin power connector, where pin 1 is +9-36V and pin 2 is GND. The internal 2-pin power connector accepts a JST VHR-2N or TE 1-1123722-2 plug from the power supply.
Caution: There is no isolation circuitry between the external +9-36V DC jack and the internal 2-pin power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9-36V DC jack is covered if the internal 2-pin power connector is to be used.
Market Segments Supported
√ Digital Signage √ Industrial Panel PC √ Retail (POS/Kiosk/ATM)
Environment
Operating Temperature : 0 ~ 60°C Storage Temperature : -20 ~ 85°C
Ordering Info
Part Number
Description
JNF894-3455
Thin Mini-ITX motherboard with Celeron J3455
JNF894G32-3455
Thin Mini-ITX motherboard with Celeron J3455 and 32GB eMMC
1. Unzip the file and copy to the USB flash drive with FAT32 format. 2. Type "fs0:" to change path when you see Shell prompt. 3. Type "BAT9NA04" to auto update BIOS. 4. Power off the system after the update finished.
Revised History
[A03]. Update Microcode for F-1 Stepping CPU. [A02]. 1.Update Microcode for INTEL SA-00233. 2.Disable Turbo Mode by Default. [A01]. Initial BIOS.
· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system. · Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.
Validate your login
Sign In
Create New Account